Pointer Shape

Lets you select from three different pointer shapes. The Password Protect function must be cancelled first. See page 69.

Brightness Control

Allows you to select Low lamp brightness when the projection is too bright for the room. The Low setting also reduces electricity consumption and fan noise. Select High to project at the maximum brightness. (Also check the Brightness setting in the Image menu; see page 53.)

Volume

Adjusts the volume for the projector’s speaker.

RCA Audio Input

Lets you change the L-Audio-Raudio port as the input for the Video port or S-Video port. Select Video to use the RCA port for the Video port. Select S-Videoto use the RCA port for the S-Video port.

Remote Receiver

Select Off to disable the remote control receivers on the projector to prevent interference from fluorescent lighting or other sources. Or enable specific receivers using the following settings: Front/Rear, Front, or Rear.

Test Pattern

Allows you to adjust the projector without a video source. While the test pattern is displayed, you can make Zoom, Focus, and Keystone adjustments.

3.When you’re finished, press Esc or Menu.

Configuring the Projector 57