4. After highlighting the option you want to adjust, use the pointer button to change the setting. In some cases, you may

have to press the Enter button to see a sub-screen for changing the setting.■Press the left or right side of the pointer button to adjust a slider bar.

■To select from two or more settings, use the pointer button to highlight the desired setting, then press Enter.

5.After changing the settings, press the Esc button to save your changes and return to the previous menu (or press it repeatedly to exit the menu system).

You can also press the Menu button to exit.

Restoring the Default Settings

You can use the menu system’s Reset options to restore the factory- default settings for:

■all the settings listed in a specific menu■all the settings in all menus

To restore the settings in a specific menu, enter the menu whose settings you want to change, select Reset, and confirm as needed. (The example below shows how to reset the Image menu.)

Reset

Reset All

To restore all the projector settings to their factory-default values, select the Reset menu, then select Reset All.

note

Reset All does not reset the Computer Inputs, User’s Logo, Language, Screen ID, Network, or Lamp settings. To reset the Computer Inputs, use the Reset option on the signal menu. To reset(s)4.25(, L)5.99g 90 Tw2399t,

Configuring the Projector 51