Selecting Network Settings

Use the Network menu to configure the projector’s network settings and set it up for network use.

1.Press the Menu button on the remote control, highlight Network, then press the Enter button to select the Settings menu.

2.Use the pointer button to highlight menu items, then press the Enter button to select from any of the following options:

Wired LAN

DHCP: Lets you turn DHCP On or Off.IP Address: Lets you assign an IP address to the projector.Subnet Mask: Lets you assign a subnet mask to the projector.Gateway Address: Lets you assign a gateway address to the projector.MAC Address: Lets you view the projector’s MAC address.

PJLink Password

Lets you assign a password to be used when accessing the projector with PJLink software.

Web Control Password

Lets you assign a password to be used when accessing the projector using Web Control.

Configuring the Projector 61