Ideally, you should place the projector directly in front of the center of the screen, facing it toward the screen squarely. The lens should be at about the level of the bottom of the screen.

Screen

Projector

If you place the projector below screen level, you’ll have to tilt it up by extending its feet. This causes the image to become “keystone” shaped,

but you can correct the distortion by pressing the or buttons on the projector. See page 36 for detailed information about correcting the image shape.

For instructions on installing the projector in a permanent location, such as a classroom or conference room, see page 111.

note

After positioning the projector, you may want to connect a Kensington MicroSaver® anti-theft device to the lock port on the projector’s left side. You can purchase this from Epson; see “Optional Accessories” on page 12.

You can also connect a commercially available anti-theft cable and lock to the metal bar on the bottom of the projector.

Setting Up the Projector 15