Shutting Down the Projector

When you’ve finished using the projector, follow the recommended procedure to shut it down. This extends the life of the lamp and protects the projector from possible overheating.

1.Turn off and disconnect any equipment plugged into the projector.2.To turn off the projector, press the P Power button twice.

Power button

3.When the P Power light is steady orange, you can unplug the projector.

With Epson’s exclusive Instant Off™ technology, there’s no cool-down period, so you can pack and go immediately after turning off the projector.

note

When the projector has not received any input signals for 30 minutes, it automatically turns off the projector lamp and enters “sleep mode.” This conserves electricity, cools the projector, and extends the life of the lamp. If you want to start projecting again, press the P Power button. If you are done using the projector, unplug the power cord. To turn off sleep mode, see page 59.

Turn off this product when not in use to prolong the life of the projector.

caution

To avoid damaging the projector or lamp, never unplug the power cord when the P Power light is green or flashing orange.

Projecting 39