note
If a password has already been set, you’re prompted for a password when entering the Password Protect menu. To enter the password, see “Starting the Projector with a Password” on page 71.
8.To display your screen logo when the A/V Mute button is pressed, select A/V Mute and press Enter.
9.Select Logo and press Enter.10.When you’re finished, press the Menu button on the remote control to exit the menu system.
Setting a Password
Follow the steps below to set a password for the projector.1.Press and hold down the Freeze button on the remote control until you see the Password Protect menu:
4.Press and hold down the Num key on the remote control while you use the numeric keypad to enter a
The password will be displayed as ****. After you enter the last digit, a confirmation screen appears. Enter the password again.
5.After you are finished setting the password, press the Menu button to exit to the Password Protect menu.
Make a note of the password and keep it in a safe place in case you forget it.