Adjusting the Image

Once you see your image, you need to make certain adjustments:

■To focus or zoom your image, see below.

■If the image is too high or too low, you can reposition it. See page 35.

■If the image isn’t square, see page 36.

■If a computer image displays incorrectly, see page 38.

If you need to fine-tune the image and/or sound, see Chapter 4.

Focusing and Zooming Your Image

Open the lens access door, then do the following:

■Use the Focus ring on the projector to sharpen the image.

■Use the Zoom ring on the projector to reduce or enlarge the image. Move the tab toward the W to increase the size, and toward the T to decrease it.

Focus ring

Zoom ring

If the image still isn’t large enough, you may need to move the projector farther away from the screen. You can also use the E-Zoombuttons on the remote control to zoom in on a portion of the image. See page 45 for instructions.

34Projecting