Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer using the projector’s menu.

1.Plug the projector in and turn it on.

2.Press the Menu button on the remote control, select Reset Lamp Hours from the Reset menu, then press Enter.

3.When you see the confirmation message, select Yes, then press

Enter.

4.When you’re finished, press Menu to exit the menu system.

Transporting the Projector

The projector contains many glass and precision parts. Follow these guidelines to prevent injury or damage:

■When hand-carrying the projector, you should use the handle to lift it only a short distance (for example, to set it on a table).

■When shipping the projector for repairs, use the original packaging material if possible. If you do not have the original packaging, use equivalent materials, placing plenty of cushioning around the projector.

■When transporting the projector a long distance, first place it in a hard-shell shipping case, and then pack it in a firm box, placing cushioning around the case.

note

The lamp usage timer shows 0H until you’ve used the lamp for at least 10 hours.

note

Epson shall not be liable for any damages incurred during transportation.

Maintaining the Projector 95