If you see a blank screen or a blue screen with the message No Signal after turning on your computer or video source, do one of the following:
■Make sure the cables are connected correctly, as described on page 12 (for laptops) or in Appendix A (for other systems).
■Make sure the power light is green and not flashing and the lens cover is off.
■Try restarting your computer.
■If you’ve connected more than one computer and/or video source, you may need to press the Computer or Video button on top of the projector to select the correct source. (Allow a few seconds for the projector to sync up after pressing the button.)
If you’re using a PowerBook:
You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps:
1.From the Apple menu, select Control Panels, then click
Monitors and Sound.
2.Click the Arrange icon.
Click here
Drag one monitor icon on top of the other
3. Drag one monitor icon on top of the other.
22Using the Projector