Creating Your Own Startup Screen
You can transfer any image on your computer to the projector, and then use it as the screen displayed when the projector is not receiving a signal. You can also set it to be displayed when you press the
A/V Mute button, or as a startup screen. The image can be a company logo, slogan, photograph, or any other image you want to use.
Capturing the ImageStart by displaying the image you want to use on the projector. You can use an image from either a computer or video source such as a VCR or digital camera. Then follow these steps to capture the image and transfer it to the projector:
1.Press the Menu button on the control panel or remote control. You see the main menu.
2.Press the down arrow (control panel) or press down on the Enter button to highlight the Capture menu.
Video
AudioUser's Logo Capture 
Execute
Effect
Setting
Capture
Advanced
About
Reset All
:Select 
:Enter
3.Press Enter to highlight User’s Logo Capture and press Enter again to select it. You see the message shown at the right.
4.Select Yes and press Enter. A selection box displays over the image.
5.Use the arrow buttons on the control panel or the Enter button on the remote control to select the area of the image you want to use. Once you have selected the entire area, press Enter.