3.Connect the other end of the computer cable to the video port on the Macintosh. If it doesn’t fit, you may have to use a Macintosh desktop adapter, which you can buy from EPSON (see page 8).
To use the adapter, remove its cover as shown and set its DIP switches according to the resolution you want to use, such as
Replace the cover and connect the adapter to the free end of the computer video cable. Then plug the cable (with the adapter) into the video port on your Macintosh.
4.If you also want to view the presentation on your computer’s monitor, connect the monitor cable to the projector’s Monitor Out port. (If necessary, attach a Macintosh monitor adapter to the monitor cable, as shown below, and then connect the adapter to the projector’s Monitor Out port.)
Macintosh monitor adapter (if needed)
5. Tighten the screws on the connectors.
84Appendix A: Connecting to Additional Equipment