Resizing the Image

Some computer images need to be resized to display in the projector’s native format: 1024 ⋅ 768 pixels. If only part of your computer image is displayed, you can correct it with the Resize button.

■Press the Resize button on the control panel. The screen image is automatically compressed.

■Continue pressing the Resize button to pan around the screen in the original resolution.

If you’re projecting from video equipment, pressing the Resize button switches the aspect ratio between 4:3 and 16:9. If you’ve zoomed in on your image (using the E-Zoombutton on the remote), you can press the Resize button to return it the original display size.

Power

Computer Video

 

A/V mute

Resize

Shift

Resize button

Adjusting the Height of Your Image

If the image is too low, you can raise it by extending the projector’s feet.

1.Stand behind the projector. Pull up the blue foot release levers and lift the front of the projector. This unlocks the feet.

2.Once the image is positioned where you want it, release the levers to lock the feet in position.

3.To fine-tune the height of the image, rotate the thumb wheels attached to the projector’s feet.

If the image is no longer square after raising it, see the next section.

caution

Do not hold the projector by the lens; this can damage it.

Using the Projector 25