caution

Don’t hold the ? Help button for more than

5 seconds, or the projector will enter the mode for resetting the lamp timer.

Using On-Screen Help

If you see a No Signal message or your audio isn’t working, you can get help by pressing the blue ? Help button on top of the projector or under the cover on the remote control. The following choices are available:

■Help for the image

Tells you what to do if you see a No Signal message

■Help for the sound

Tells you what to do when your audio isn’t working

■Language selection

Lets you display the help information and projector menus in any of nine different languages

Follow these steps to get help:

1.Press the blue ? Help button. You see the help menu.

2.Use the up or down arrow buttons on the control panel (or move the Enter button up or down on the remote control) to highlight one of the options. Then press the or Enter button to select it.

3.Press the or Enter button again to view the solutions. (Press Esc if you need to back up.)

4.Press the down arrow button on the control panel (or press down on the Enter button on the remote control) to display additional text.

5.To exit the Help system, press the blue ? Help button.

If none of the suggestions solves your problem, see additional solutions to problems in the following sections.

66Solving Problems