If this option isn’t available, you may need to select one of the Simulscan resolution settings:
1. Click the Monitor icon.
Click here
Select a Simulscan resolution
2.Select a Simulscan resolution as shown. (Allow a few seconds for the projector to sync up after making the selection.)
If you’re using a PC laptop:
■Press the function key that lets you display on an external
monitor. It’s often labelled with an icon such as 
but it may also be labelled CRT/LCD. You may have to hold down the Fn key
while pressing it. Check your laptop’s manual or online help for details.
On most systems, the 
key lets you toggle between the LCD screen and the projector, or display on both at the same time.
Allow a few seconds for the projector to sync up after pressing it.
■Depending on your computer’s video card, you might need to use the Display utility in the Control Panel to make sure that both the LCD screen and external monitor port are enabled. See your computer’s documentation or online help for details.
Using the Projector 23