4.Connect the other end of the computer cable to the computer’s video port.

5.Tighten the screws on the connectors.

Connecting the Mouse Cable

To use the remote control as a mouse, follow the steps below. You’ll use a different mouse cable, depending on whether your computer has a round PS/2 mouse port or a flat USB port.

1.Connect the round end of the mouse cable to the projector’s Mouse 1 port, as shown.

note

If you have a PC with a serial mouse port, you’ll need a serial mouse cable. See your projector dealer to obtain the correct cable.

PS/2 or USB mouse cable

Mouse 1 port

2.Disconnect your mouse from the port on the back of your computer and replace it with the other end of the cable. (Your computer’s mouse will be disabled while you are using the remote control as a mouse.)

Appendix A: Connecting to Additional Equipment 81