note
If you want to overwrite an existing setting, move to the setting and press Enter.
When the confirmation message appears, choose Yes and press Enter.
4.Press Enter to assign it to the next available number.
5.Press Enter again. When you see the “Overwrite?” prompt, select Yes or No and press Enter.
6.Press Esc to return to the Video menu.
When you want to use a saved setting, press the Preset button on the remote control. You see the setting for session number 1 displayed in yellow at the top right of the screen.
To select another number, press the Preset button again until the setting number you want is displayed. The projector resets according to the selected setting.
Adjusting the Sound
You can use the Audio menu to adjust the sound volume or treble/bass balance.
1.Press the Menu button. You see the main menu.
2.Press the down arrow (control panel) or press down on the Enter button (remote control) to highlight Audio. You see the following:
Video | Volume | : | 0 |
Audio | Treble | : | 0 |
Effect | Bass | : | 0 |
Setting | Reset |
|
|
Execute | |||
Capture |
|
|
|
Advanced |
|
|
|
About |
|
|
|
Reset All |
|
|
|
:Select 
:Enter
3. Press Enter to select the Audio menu.
46