Adjusting the Image Shape

If the projected image isn’t square or has a “keystone” shape, do one or more of the following:

■If your image looks like or , you’ve placed the projector off to one side of the screen, at an angle. Move it directly

in front of the center of the screen, facing the screen squarely.

Keystone■ If your image looks like or , press the + or — side of the Keystone button to correct the shape of the image. After correction, your image will be slightly smaller.

You can also perform electronic keystone correction using the projector’s Setting menu. See page 52.

Adjusting the Tracking and Synchronization

If you’re projecting from a computer and you notice vertical stripes or the image is flickering or noisy, you can increase the clarity by pressing the button on the control panel (or the Auto button on the remote control). This resets the projector’s tracking, sync, and position settings. If necessary, you can also correct the image manually using the Tracking and Sync buttons on the control panel.

■Press the Tracking – and Tracking + buttons to eliminate vertical stripes.

note

Images will be projected more vividly if you adjust the Tracking before adjusting the

Sync.

Tracking

Tracking

Keystone

Volume Sync

■Press the Sync – and Sync + buttons to eliminate flashing, blurring, or vertical noise on the screen image.

Menu

Sync

Esc

Help

Tracking

 

 

Tracking

Keystone

 

 

 

Volume

Sync

 

 

26Using the Projector