4.Use the arrow buttons (control panel) or the Enter button (remote control) to set the following options:

■Keystone

Adjusts a distorted image from a trapezoid shape to rectangular.

■P in P

Changes from a composite (standard) video source to an S-Video source for the picture-in-picture display.

■No-Signal Msg

Selects the screen color and message to display when the projector is not receiving a signal. The logo setting displays an image that you have transferred to the projector. See page 49 for instructions on transferring an image to use as the no-signal message.

■Prompt

Turns off the identifying text that appears briefly when you switch from computer input to a video source.

■A/V Mute

Selects the screen color or image to display when you press the A/V Mute button. The logo setting displays an image that you have transferred to the projector. See page 49 for instructions on transferring an image to use for the A/V Mute display.

■BNC

Specifies the format for input to the BNC connectors. If the source is a computer, select RGB. If the source is a video device, select YCrCb.

■Sleep mode

Disables the power management system. Normally, the lamp turns off when the projector has not received any input signals for 30 minutes.

5.When you’re finished, press Esc.

52Fine-tuning the Projector