caution

Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure.

6.Fully insert the new lamp. (The plastic flap will flex out of the way.)

7.Once the lamp is fully inserted, tighten its screws.

8.Replace the lamp cover and tighten its screw securely. (The projector won’t come on if the lamp cover is loose.)

9.Reset the lamp timer as described in the following section.

Resetting the Lamp Timer

After you install a new lamp, you need to reset the timer so the projector can keep track of how many hours it has been used. Follow these steps:

1.Press the Help button and hold it down for at least 5 seconds. You see the Help menu, and then the following message:

Reset Lamp ON Time

Do you reset the Lamp ON Time?

YesNo

:Select :Execute

62Maintaining and Transporting the Projector