If a consumable product reaches the end of its service life, the printer stops printing and displays the following messages on the LCD panel or the window of EPSON Status Monitor 3. When this happens, the printer cannot resume printing until you replace the depleted consumable products.

LCD Panel Message

Description

 

 

Replace Toner xxxx*

The indicated toner cartridges are empty.

 

 

Replace Photocondctr

Printing has stopped to avoid damage to the

 

engine.

 

 

Replace Transfer Unit

The transfer unit has reached the end of its

 

service life.

 

 

*The letters C, M, Y, and K appear in this position, indicating the color of the toner to be replaced. For example, the message Y Toner Low means that the amount of toner remaining in the yellow toner cartridge is low.

Note:

Messages appear for one consumable product at a time. After replacing a consumable product, check the LCD panel for replacement messages for other consumable products.

Toner Cartridge

Handling precautions

Always observe the following handling precautions when replacing toner cartridges.

❏Installing a genuine toner cartridge is recommended. Using a non-genuine toner cartridge may affect print quality. EPSON shall not be liable for any damages or problems arising from the use of consumable products not manufactured or approved by EPSON.

8

8

8

8

8

8

8

8

8

8

8

8

Maintenance and Transportation

181