Optional RAM Error
The optional memory module may be corrupted or incorrect. Replace it with a new one.
Paper Out XXXXX YYYY
There is no paper in the specified paper source (XXXXX). Load paper of the size (YYYY) into the paper source.
Paper Set XXXXX YYYY
The paper loaded in the specified paper source (XXXXX) does not match the required paper size (YYYY). Replace the loaded paper with the correct size paper and press the N Start/Stop button to resume printing. Or press the q Cancel Job button to cancel the print job.
If you press the N Start/Stop button without replacing the paper, the printer will print on the loaded paper even though it does not match the required size.
Printer Open
Cover A, cover B, cover D, or some combination of these covers are open. To clear this error, close all covers.
Print Overrun
The required time to process the print data exceeded the print engine speed because the current page is too complex. Press the
NStart/Stop button to resume printing. Or press the q Cancel Job button to cancel the print job. If this message appears again, select On as the Page Protect setting in the control panel’s Setup Menu.
If you continue to receive this message when printing a particular page, try simplifying the page by limiting the number of graphics or reducing the number and size of fonts.
9
9
9
9
9
9
9
9
9
9
9
9
Troubleshooting 261