The Paper Size setting may be

Make sure the correct paper size is set

incorrect.

in the Tray Menu on the control panel.

 

 

There may be a problem with

Replace the photoconductor unit. See

the photoconductor unit.

“Photoconductor Unit” on page 187.

The printed image is light or faint

Cause

What to do

 

 

Your paper may be moist or

Do not store your paper in a humid or

damp.

damp environment.

 

 

The Toner Save mode may be

Turn off the Toner Save mode using the

on.

printer driver or the printer’s control

 

panel menus.

 

 

There may be no toner left in

If the message on the LCD panel or in

the toner cartridge.

EPSON Status Monitor 3 indicates that

 

the amount of toner left is low, see

 

“Replacing a toner cartridge” on page

 

182.

There may be a problem with the photoconductor unit.

Replace the photoconductor unit. See “Photoconductor Unit” on page 187.

The non-printed side of the page is dirty

Cause

What to do

 

 

Toner may have spilled onto the paper feed path.

Clean internal printer components by printing three pages with only one character per page.

240Troubleshooting