2.For Windows, click the Basic Settings tab, then select the Manual Feed check box. For Macintosh, click the Manual Feed check box in the Basic Settings dialog box.

If you want to press the N Start/Stop button before printing each page, select the Each Page check box; otherwise, you only need to press the N Start/Stop button once to start printing.

3.Select the correct paper size from the Paper Size list.

4.If paper of the selected size is already loaded, go on to the next step. Otherwise, remove any paper remaining in the tray. Load a sheet or a stack of the selected size paper with the printable side up. Adjust the paper guides to match the paper size you are loading.

Note:

Load paper into the MP tray with the printable surface facing down, but load the standard and optional paper cassettes with the printable surface facing up.

5.Print a document from your application. The LCD panel shows Manual Feed and the selected page size.

Press the N Start/Stop button to print. Paper is loaded and printed.

Loading Paper

This section describes how to load paper into the MP tray and the optional paper cassette. If you use special media such as transparencies or envelopes, see also “Printing on Special Media” on page 38.

2

2

2

2

2

2

2

2

2

2

2

2

Paper Handling

31