If Off is selected as the Auto Cont setting on the control panel’s Setup Menu, press the N Start/Stop button to print on the back of the next sheet, or press the q Cancel Job button to cancel the print job.
If On is selected as the Auto Cont setting on the control panel’s Setup Menu, printing continues automatically after a certain period of time.
Face Down Full
The output tray is full of printouts, and the printer has stopped printing. Remove the printouts from the output tray, and press the N Start/Stop button to continue printing. The output tray can hold up to 250 sheets.
Form Feed
The printer is ejecting paper due to a user request. This message appears when pressing the N Start/Stop button once to make the printer offline, and then holding down the N Start/Stop button for more than 2 seconds in order not to receive form feed command.
Image Optimum
There is insufficient memory to print the page at the specified print quality. The printer automatically lowers the print quality so that it can continue printing. If the quality of the printout is not acceptable, try simplifying the page by limiting the number of graphics or reducing the number and size of fonts.
To clear this error, select Clear Warning from the control panel’s Reset Menu. See “How to access the control panel menus” on page 147 for instructions.
You may need to increase the amount of printer memory to be able to print at the desired print quality for your document. For more information on adding memory, see “Memory Module” on page 170.
256Troubleshooting