Caution

Although the connectors and ports for the mouse and keyboard are physically identical, they cannot be used interchangeably. Be sure to plug the mouse connector into the MOUSEport, or you may damage your system.

If your system has not already been configured, you may need to install a mouse driver. See your mouse manual for instructions. (If you are using Windows, the mouse drive was automatically installed by the program.)

Connecting a Monitor

You can connect your VGA monitor to the computer’s built-in VGA port as described below. (If you will be using a different type of monitor, connect it to the video adapter card installed in your system instead.)

1.Place your monitor on top of or near the computer. Turn the

monitor and computer around so the backs are facing you.

2.There should be two cables provided with your monitor: the monitor cable (to connect it to the computer) and the power cable (to connect it to the power source). On most monitors, the monitor cable is permanently attached to the monitor. If your monitor does not have an attached cable, connect the cable to it now.

3.Examine the connector on the monitor cable and line it up with the Sport on the computer. Then insert the connector into the port.

Caution

To avoid damaging the connector, be careful not to bend the pins when you insert it.

1-4Setting Up Your System