The System Summary Option
When you select the System Summary option from the Main Menu, the SETUP program displays a summary of the configuration settings for your system.
This is the same screen you see during system startup. You can choose not to have the system display this screen so system startup is faster. See page
Exiting SETUP
When you leave SETUP, you can save your settings, or exit SETUP without saving your settings. You can also return all values to the factory defaults.
To leave SETUP, press ESC from any SETUP screen. From the Main Menu, you can do the following:
Load ROM | Loads the factory default settings | |
Default Values | stored in ROM back into CMOS. | |
|
| If you change your system |
|
| configuration and then have |
|
| problems, you can load the ROM |
|
| values to boot the system and |
|
| start over. |
Load | Values | Loads the current values stored in |
from | CMOS | CMOS for all SETUP options. This |
|
| ignores any changes you have |
|
| made using SETUP. |
Save | Values | Saves the changes you have made |
to CMOS | to your configuration to CMOS. | |
Press | ESC to leave | SETUP and restart your computer. |