Cache memory configurations
Installing the Cache Chips
Follow these steps:
1.Locate the external cache memory sockets on the main system board, shown on page
2.If there is an option card in your way, remove it. See page
Caution
To avoid generating static electricity and damaging the cache chips, ground yourself by touching the metal surface on the inside of the computer’s back panel. Then remain as stationary as possible while you install them.
3.Remove the cache chips from their package and inspect
them. The pins should point inward at slightly less than a 90o angle.
If any of the pins are bent or crooked, straighten them gently with your fingers or with small tweezers to align them with the other pins. Be careful when you do this; the pins are fragile and can break off easily.