If you enable the Password on boot option, you must enter the Supervisor or User password each time you turn on the system. If you do not enable this option but you have defined passwords, you must enter the password each time you start the SETUP program. If both a Supervisor and User password are enabled, SETUP displays options for setting the User password only for users who logged on with a user password.
To specify a User password, you must first specify a Supervisor password, follow these steps to enter or change a Supervisor password:
1.Select the Set Supervisor Password option and press
Enter.
2.You see a Set Supervisor Password window. Type the
password you want | to | use, then press Enter. You can define |
a password of up | to | eight characters. |
3.Type the same password a second time and press Enter. You see a message that your changes have been saved.
4.Press the spacebar . The Supervisor Password I S option is now set to Enabled.
To set a User password, select the Set User Password option and follow the steps above.
Deleting Passwords
To delete your passwords, follow these steps:
1.Set the Password on boot option to Disabled .
2.Delete the User password by pressing Enter for both the password field and the confirmation field. Don’t type any characters in these fields.