If you want to add devices to the Items Detected list, follow these steps:
1.Press[c] or[T)t to select Add Tests. You see the Add menu, such as the following:
Numeric Coprocessor
Diskette Drive B
Hard Disk Drive #2
Serial Port COM3
Serial Port COM4
Printer Port LPT2
Printer Port LPT3
LPTl Printer Test
LPT2 Printer Test
The Add menu lists the testable devices that the computer has not detected as Enabled in your system. You also see any devices that you deleted from the Delete menu in case you want to be able to test them.
2.Press [T] or (7) to highlight the device you want to add and press [Enter). The device is removed from the Add menu and added to the Execute list. You can add as many devices as you want.
3.When you are finished adding devices, press (t] to select Execute and see the next section.