3. Replace the three cover retaining screws, as shown below.

4.Reconnect the computer to the monitor, printer, keyboard, and any other peripheral devices you have. Then reconnect the power cable to the back of the computer and to an electrical outlet.

Post-installation Procedures

After you install or remove options such as memory modules or a new processor, you must run SETUP to update the computer’s configuration. See Chapter 2 of the Setup Guide for instructions.

Additionally, you may need to add some commands to your configuration files. See your operating system manual and the manual that came with your optional equipment for instructions.

You may also want to test a newly-installed option. Some options come with their own diagnostic programs, and you can use the diagnostic program on your Reference diskette to test the system memory, serial and parallel ports, disk drives, monitor, and display adapter. See Chapter 4 for instructions.

2-30 Installing and Removing Options