Epson Endeavor Error Messages

System diagnostic tests (continued)

Device	Tests available	Description
Video	Adapter check	Tests the operation of the
Adapter	Attribute check	built-in VGA display adapter
	Character set check
	Graphics mode check
	Screen paging check
	Sync check
	Run all above checks
Keyboard		Tests the operation of your
		keyboard by displaying an
		asterisk on a keyboard diagram
		for each key you have pressed

•The Write, read check destroys data on the disk. Be sure to back up data on a hard disk or insert a blank, formatted diskette before running this test.

Error Messages

The following table lists all the error messages that may appear during System diagnostic testing.

System diagnostic error messages

Error code	Message
System board
0101	CPU error
0102	ROM checksum error
0103	Timer counter register error
0104	Timer counter error
0105	Refresh error
0105	DMA controller register error
0106	DMA page register error
0107	Refresh error
0108	Keyboard controller timeout error
0108	Keyboard controller self diagnostic error
0108	Keyboard controller write command error
0109	CMOS checksum error
0110	CMOS shutdown byte error
0111	CPU instruction error

4-8 Running System Diagnostics