Use (I‘) or [T] or type the number of the desired option to highlight a test and then press [c) to run it.

If you selected to run the tests more than once, you do not see a submenu. The program immediately begins executing all tests that do not destroy data.

5.When the test is completed, you see the Execute menu or the test submenu again. You can select another test or exit the menu.

To exit System diagnostics, press (7) to select Quit and press I=]. You return to the operating system command prompt.

Resuming From an Error

If an error prevents a test from running, you see a Runtime Error information box. Follow the instructions on the screen to solve the problem.

If an error occurs during a test, the test stops and an error message appears. Follow the instructions on the screen to print the message or to continue without printing it.

For a complete list of the error messages the program may display, see the table at the end of this chapter.

4-6 Running System Diagnostics