Running Tests

Follow these steps to run a test from the Execute menu:

1.Press [t3 or (T] to select Execute. You see the Execute menu, such as the following:

System Board

Numeric Coprocessor

System Memory

Diskette Drive A

Hard Disk Drive #1

Serial Port COMl

Printer Port LPTl

Video Adapter Test

Keyboard Test

2.Press (t) or 17) to highlight the device you want to test and press [Enter). You see the Repeat prompt:

How often to repeat test? 1

3.If you want to run the test once, press [E). To run the test more than once, type the number of times and press [cl.

4.If there is only one test for a device, the program begins testing immediately. If there is more than one test for the device, you see a submenu, such as the following:

HARD DISK DRIVE(S) AND CONTROLLER CHECK MENU

1 - Seek check

2 - Write, read check

3- Read, verify check

4- Run all above checks

0- Exit

Running System Diagnostics 4-5