If you have forgotten your current System Access or Setup Access password, follow these steps:
1. Turn off the computer.
2 . Follow the instructions under “Changing the Jumper Settings” in Chapter 2 to disable the password function by setting jumper J7 to On.
Caution
When you move J7 to the On position, all the settings you changed using the SETUP program return to the factory defaults. If you move this jumper, you must run SETUP to update your system configuration again.
3 . Turn on the computer.
4 . Turn the computer off again.
5 . Follow the instructions under “Changing the Jumper Settings” in Chapter 2 to set jumper J7 to the Off position.
6 . Turn on the computer again.
7 . When you see Press Fl to continue or Del to start SETUP,press (F), Youseethe SETUP screen. If you do not want to set a new password, go to step 9. If you want to set a new password, go to step 8.
8 . To set a new password, select the security for system Access or Setup Access and press [=I. Type a new password at the prompt and press [E]. You must enter the new password twice. (See Chapter 2 of the Setup Guide for more information about setting a password.) Now go to step 10.
Troubleshooting