EPSON GL/2 Mode

Note:

You cannot change the GL/2 Mode items by SelecType. To change these items, use the GL/2 command listed in Appendix C.

In EPSON GL/2 mode, you can use your printer with plotter applications. This mode is similar to the GL/2 mode supported in HP LaserJet 4 mode. EPSON GL/2 mode emulates some of the HP-GL plotter commands and includes all of the commands found in HP’s GL/2 mode, plus two additional commands.

GLMode

Selects whether the emulation is similar to the GL/2 or the HP LaserJet 4 emulation of the GL/2.

Scale

Selects whether the output from the software is scaled, and if so, how the scale factor is calculated: cased on the output paper size of the software application.

Origin

Selects whether the logical origin of the “plotter” is from the corner or the center of the paper.

Pen

Selects the logical “pen” which is used to “plot” the drawing.

End

Selects the way in which lines end.

Join

Selects the way in which lines are joined.

5-36SelecType