Using the OneTouch Modes
The OneTouch modes are part of SelecType mode, but they are more limited and easier to use. The settings you make in these modes and SelecType are reflected in each other.
To enter OneTouch mode 1, press the SelecType button |
|
(repeatedly if necessary) until the light next to Paper Source |
|
comes on indicating the printer is now in OneTouch mode 1. The |
|
current OneTouch mode 1 settings for Paper Source, page Size, |
|
Manual Feed, and Orientation are shown on the display above the |
|
corresponding setting. For example, Port or Land is shown above |
|
Orientation. | 5 |
OneTouch mode 1 |
To enter OneTouch mode 2, press the SelecType button (repeatedly if necessary) until the indicator light next to RITech comes on indicating the printer is now in OneTouch mode 2. The current OneTouch mode 2 settings for RITech, Copies, MP Tray Size, and Toner Save Mode are shown on the display above the corresponding setting. For example, On or Off is shown above Toner Save Mode.
OneTouch mode 2
To make OneTouch settings, access one of the modes as described above and press the button located under the setting you want to change to cycle forward through the available options. You can also press ALT (SelecType) and the button to cycle backward through the available options.
SelecType