Emulation menu
Use this menu to select the printer emulation mode. You can specify different emulations for each interface; in other words, for each computer you connect. Since each emulation mode has its own specific options, make settings in the LJ4, ESCP2, FX, GL2, or I239X menus, as necessary. The options you can set are the same for every interface.
Item | Values |
|
|
Parallel, Serial, AUX | Auto, LJ4, ESCP2, FX, I239X, PS3*1, |
| GL2 |
|
|
*1 Available only when the PostScript 3 module is installed.
Note:
The default setting may change depending on which option is installed. Print a status sheet to confirm the current default settings.
Printing menu
The settings in the printing Menu can be set from within your software. The settings you make in your software override SelecType settings.
All items in the printing Menu except Resolution, Wide A4, and Skip Blank Page can be accessed directly with the OneTouch Modes. See “Using the OneTouch Modes” later in this chapter.
Paper Source
Specifies whether paper feeds into the printer from the MP Tray, the standard lower paper cassette, or from optional lower paper cassettes.
If you select Auto, paper feeds from the tray containing the paper that matches the paper selected in the Page Size setting.