Value | Selects the corresponding OneTouch mode |
| setting listed above this button if in OneTouch |
| mode 1 or 2, or selects the parameter available |
| within the current item, after entering the |
| SelecType mode menu. |
Continue | Enables the printer to resume printing after |
(Reset) | certain |
| errors have been cleared. If the Continue |
| light is flashing, read the status or error |
| message on the display and correct the |
| problem as described in “Status and Error |
| Messages” on page |
| combination with the ALT button, the printer |
| is reset. |
Form Feed | When the printer is off line and data remains |
| in the printer’s memory (Form Feed light is |
| on), prints out the data and clears the buffer. |
When to Use SelecType
In general, use SelecType only for settings you cannot make in your software, including the following:
❏Changing the emulation modes and selecting the IES (Intelligent Emulation switching) mode
❏Specifying the channel and configuring the interface
❏Choosing the size of the memory buffer used to receive data
You should keep in mind the following points when using SelecType settings.
❏A number of SelecType settings can also be made using the OneTouch modes, printer driver.