Status and Error Messages

This section contains an alphabetical list of the status, error, and warning messages that appear in the control panel display.

If Auto Continue is turned on in the printer driver or the SelecType, some error messages are not displayed even though the problem remains. Ordinarily, you should leave Auto Continue off.

Check Paper Size

The paper size setting is different from the size loaded in the printer. Check to see if the correct size of paper is loaded in the tray; then press the Continue button.

If you turn on Size Ignore in the SelecType Config menu or the printer driver, this menu does not occur.

Check Paper Type

The paper type setting on the printer driver’s Basic Settings menu, or in SelecType, is different from the type of paper loaded in the printer. Make sure the correct type of paper is loaded in the printer; then press the Continue button to clear the message.

Collate was disabled

The printer does not have sufficient memory to collate print jobs. Only one set of copies will be printed. Reduce the contents of print jobs or add more memory in your printer. Press the Continue button to clear the message.

6-14Troubleshooting and Maintenance