AutoCR

Use the automatic carriage return option to perform a carriage- return line-feed (CR-LF) operation whenever the print position exceeds the right margin. if Auto CR is Off, the printer does not print characters beyond the right margin, and it does. not perform a linewrap until it receives a CR. Most software programs take care of this function.

AutoLF

When you set AutoLF to Off, the printer does not send an

 

automatic line feed (LF) command with each carriage return (CR).

 

When you set AutoLF to On, the printer adds a line feed to each

 

carriage return it receives. If your text lines overprint each other,

5

set AutoLF to On.

Bit Image

With BitImage set to Dark or Light, your printer can correctly emulate the graphics densities set with the printer commands. When you select Dark, the bit image density is high. When you select Light, the bit image density is low.

The BarCode setting converts bit images to bar codes by automatically filling in any vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader. BarCode is not available in I239X mode.

This mode reduces the size of the image being printed and may cause some distortion when printing bit-image graphics.

ZeroChar

This option determines whether the printer prints a slashed zero () or an unslashed zero (0). This feature is useful for clearly distinguishing between an uppercase letter O and zero when printing documents such as program lists.

SelecType 5-33