S5U1C62000A MANUAL EPSON 3
(S1C60/62 FAMILY ASSEMBLER PACKAGE)
CHAPTER 2: INSTALLATION
CHAPTER 2INSTALLATION
This chapter describes the required working environments for the tools supplied in the S1C62
Family Assembler Package and their installation methods.

2.1 Working Environment

To use the S1C62 Family Assembler Package, the following conditions are necessary:
Personal computer
An IBM PC/AT or a compatible machine which is equipped with a CPU equal to or better than a
Pentium 75 MHz, and 32MB or more of memory is recommended.
To use the optional In-Circuit Emulator ICE, the personal computer also requires a serial port (with a
D-sub 9 pin).
Display
A display unit capable of displaying 800 × 600 dots or more is necessary.
Hard disk and CD-ROM drive
Since the installation is done from a CD-ROM to a hard disk, a CD-ROM drive and a hard disk drive
are required.
Mouse
A mouse is necessary to operate the tools.
System software
The S1C62 Family Assembler Package supports Microsoft® Windows®95 (English or Japanese) and
Windows NT®4.0 (English or Japanese).
Other development tools
To debug the target program, the optional In-Circuit Emulator ICE (S5U1C62000H) and an Evaluation
Board (S5U1C62xxxE) are needed as the hardware tools.
The evaluation board is prepared for each S1C62 model.