S5U1C62000A MANUAL EPSON 177
(S1C60/62 FAMILY ASSEMBLER PACKAGE)
CHAPTER 9: DEBUGGER
bpc (break point clear)
Function
This command clears the specified breakpoints that have been set.
Format
>bpc <break1> [<break2> [<break3> [<break4>]]]↵(direct input mode)
<break1–4>: Break address or address area; hexadecimal or symbol (IEEE-695 format only)
Example
>bp↵
0: 0100 ... Break points that have been set
1: 0200..0300
1. set 2. clear 3. clear all ... ? ↵
>bpc 100 150..250↵... Clears PC break points at address 0x100 and the area from 0x150 (0x200)
>bp↵ to 0x250.
0 : 0251..0300
1. set 2. clear 3. clear all ... ? ↵
>
Notes
• The format of parameters is same as the bp command. You can also use the guidance input mode of bp
command to do the same operation.
•You can use this command for multiple times to clear breakpoints.
• If the specified addresses or areas have not been set as PC breakpoints, no clear operation is done.
GUI utility
[Break | Breakpoint Set …] menu item
When this menu item is selected, a dialog box appears for clearing PC breakpoints. (See the bp
command.)
[Break] button
When this button is clicked after placing the cursor to a PC break address line in the [Source] window,
the breakpoint is cleared. If the address has not been set as a PC breakpoint, this button sets a new PC
breakpoint at the address.
[Break] button