Ericsson LBI-39169 Status Colors/Levels, Category Status Status Meaning Condition, Icon Color

MONITORING EDACS FAULT CONDITIONS LBI-39169

		Table 1 - Status Colors/Levels
Category	Status	Status Meaning
	Condition
Administrative	Unmanaged	Users can set this value, which indicates that
		the object should not be monitored and that the
		status should be ignored. When the user sets
		the object back to “managed.” the EDACS-
		>Fault->Update operation must be performed.
Administrative	Testing	An application sets the status to “testing” when
		an object is undergoing temporary diagnostic
		or maintenance procedures. This category is
		not used by the EDACS Network Manager
		application.
Administrative	Restricted	An application sets the status to “restricted”
		when a valid associated CEC/IMC/RCEC/SG
		node license does not exist for this element.
Administrative	Shutdown	An application sets the status to “shutdown”
		when an object is inactive (although there may
		not be anything necessarily wrong with the
		object). This category is not used by the
		EDACS Network Manager application.
Operational	Unknown	An application sets the status to “unknown”
		when the status of an object cannot be
		determined. EDACS icon may be blue if there
		is another icon with the same Network Number
		and Node Number or if polling does not detect
		a physical device corresponding to this icon.
Operational	Normal	An application sets the status to “normal” when
		the object is in a normal operational state.
Operational	Warning	An application sets the status to “warning”
		when an object may face a potential problem.
Operational	Minor/	An application sets the status to
	Marginal	“minor/marginal” when an object has a minor
		problem; this status should not, however,
		impede the normal operation of the network.
Operational	Major	An application sets the status to “major” when
		an object has serious problems; these
		problems are likely to impede normal use of
		the network.
Operational	Critical	An application sets the status to “critical” when
		a device is not functioning or is not accessible
		by the EDACS Network Manager.

Icon Color

Off-white

Salmon

Tan

Dark Brown

Blue

Green

Cyan

Yellow

Orange

Red

27