![](/images/new-backgrounds/1251290/25129067x1.webp)
| MONITORING EDACS FAULT CONDITIONS |
8.3.2.3 Deleting Events
Events continue to appear in an Event Browser list until you delete them or the maximum number of events for the browser has been reached. The primary reason to delete events is so you can determine when new events occur. If you do not delete events, the buttons in the Event Category window will continue to show status color, and you will not know when newer events of the same or lower severity level occur. If you want to keep the event, but not delete it, you can assign it to a new category or new severity level. In this way you can “acknowledge” the receipt of the event, but keep the event around to look at later. If you have installed the Network Node Manager product, you can create a new category using the event configurator. Call this new category “Acknowledged Events”, and assign acknowledged events to that category.
Once deleted, the same events does not
8.3.2.4 Filtering Events
Within any Event Browser window, you can filter based on one or more criteria. These criteria are severity, source, and/or event. You use filtering to reduce the number of events displayed. The status of the filtering is shown at the bottom of the Event Browser window, showing how many events are in the category, as well has how many of each severity are displayed. If filtering is on, the status will change to indicate that a subset of the events in the category is displayed. You can then perform operations based on the filtered events, the selected events, or all the events in the category.
As an example, to see all the Critical events:
1.Select the “All Events” category.
2.From the “All Events Browser” pick View
You now see all the critical events. After resolving all these events, you will want to delete them.
3.If you select Action
8.3.2.5Locating Source of Event
To locate the source of a specific event perform the following:
1.Select the event and then choose
This will bring up a submap containing the source of the event. The label for the source object will be highlighted.
2.Select the source object and use the menu items in the OVW map menu bar to obtain more information or to fix the problem that has caused the event.
8.3.2.6 Obtaining Detailed Event Information
Use the following procedure to obtain additional detailed information regarding the cause of the alarm and possible corrective action:
1.Highlight the event, and select the
Figure 13 - Event Description
34