Extron electronic 6400 Series, 3200 Series manual Determining Video Output Card Population

Chapter 5 • Upgrades and Troubleshooting

			BME
			-
			4
			+
A		ADDRESS
B			IN
C	COMM.
D
E
A	MKP		SYNC
B
C
D
E			OUT
	RS232/RS422	ANAHEIM, CA
		MADE IN USA
IN	COMM.
OUT	BME
AC POWER INPUT
FUSE: 250V 5.0A TT			POWER CORD BEFORE SERVICING
		5.0A MAX 50/60Hz
		100-240V	DISCONNECT

INPUTS

1	9	17	25	33	41	49	57
2	10	18	26	34	42	50	58
3	11	19	27	35	43	51	59
4	12	20	28	36	44	52	60
5	13	21	29	37	45	53	61
6	14	22	30	38	46	54	62
7	15	23	31	39	47	55	63
8	16	24	32	40	48	56	64

OUTPUTS

OUT	OUT	OUT	OUT	OUT	OUT	OUT	OUT
1 - 8	9 - 16	17 - 24	25 - 32	33 - 40	41 - 48	49 - 56	57 - 64

Determining Video Output Card Population

The drawings above show the rear panel layout for the Matrix 3200 and Matrix 6400 Video Switchers. The number of input connectors is fixed at 32 or 64; the number of output connectors depends on the number of Video Output cards and is variable from 8 to 32 or 64 in multiples of 8. Each card supports 8 video outputs and each card slot is labeled to identify the physical connector range supported by the card in that slot (low number = top connector, high number = bottom connector on card).

The chart to the right shows the only supported Video card population for the following configurations.

32 inputs x 8, 16, 24, 32 outputs

64 inputs x 8, 16, 24, 32, 40, 48, 56, 64 outputs

An example matrix configuration of 64x40 would require five

Video Output cards in slots 1-8, 9-16, 17-24, 25-32 and 33-40.

If the cards are not installed as shown for each matrix size, the Extron Matrix 6400 System Virtualization/Control Software will be unable to accurately virtualize the system. The Video Output circuit cards (PN# 70-068-01) plug into connectors OUTPUTS 1-8 through 25-32 or 57-64. It is not possible to plug the circuit cards in upside down.

Extron • Matrix 3200/6400 Series • User’s Manual 5-8