Extron electronic MSX1616HR Front Panel Operation, Creating a Patch in Matrix Mode

16

Front Panel Operation

The MSX1616 series has three operational modes: Matrix, Preview, and Express.

•In Matrix mode, you can select an input, assign it to any output or series of outputs, and press TAKE to accept the new switch. Matrix mode allows maximum switching flexibility.

•In Preview mode, you can view input/output patches you have created.

•In Express mode, you can recall previously saved presets with the press of one button. Non-technical users will find Express mode simple and convenient to use.

Creating a Patch in Matrix Mode

1.Press the number of the desired input device. Result: The LED indicator above the button glows.

2.Press the number(s) of the output(s) where you want the input signal sent. Result: The LED indicator blinks. The connection does not yet exist.

3.Press TAKE.

Result: The switcher makes the patches, stores the information in memory, and all selected LEDs go out.

To confirm the patch:

Press the input button again.

Result: The LED above each output connected to that input glows.

Creating Presets in Matrix Mode

Once you create a patch, you can assign the patch a preset number you can recall later without having to reconfigure the patch.

1.Create the desired switch or configuration of input/output connections.

2.Press TAKE.

3.Press MENU until 0DLQ￿0HQX displays in the LCD.

4.Select 3UHVHW￿6WRUH on the LCD.

Result: 6WRUH￿3UHVHW displays in the LCD.

5.Press any one of the input or output buttons to pick a storage location for this preset. Result: The switcher accepts the preset and stores it into memory.

MSX1616 OPERATION MANUAL - v1.0 5/8/02  2002 - INLINE, INC.