FARGO electronic 970627-510489-(04) manual Using FotoFUN! for Macintosh

Section 5: Using FotoFUN! for Macintosh

A. CONNECTING FotoFUN! TO YOUR COMPUTER

FotoFUN! is designed to be used with any Apple Macintosh supporting Color QuickDrawª and running system software

7.0or higher. For best performance, a Macintosh with a 68040 processor and 8Mb of RAM (or higher) or a PowerMac with 8Mb of RAM (or higher) is recommended. The FotoFUN! printer driver is accelerated for use with a PowerMac. FotoFUN! cannot be used with the Macintosh Plus, SE, or Classic since these models do not support Color QuickDraw.

The printer is equipped with a high-speed serial port. This port is the means through which FotoFUN! receives data from your computer. This port is not AppleTalkª compatible. To connect FotoFUN! to your computer, simply obtain a standard serial cable with an 8 pin mini-DIN connection on each end, and refer to the following steps:

1.Connect one end of the serial cable to the printer.

2.Connect the other end of the cable to either the Printer or Modem port of your Macintosh.

17 Using FotoFUN! for Macintosh