FARGO electronic 970627-510489-(04) manual Cleaning the Outside and Inside of the Printer

B. CLEANING THE OUTSIDE AND INSIDE OF THE PRINTER

Occasionally, you may wish to clean dust or other accumulated particles from the inside or outside of your printer. Always disconnect your printer’s power before cleaning. To clean your printer, use a soft, lint-free cloth slightly moistened with isopropyl alcohol to wipe off dusty areas of your printer. If cleaning the inside of the printer, you must first remove the ribbon. Then, gently wipe out all visible areas of the printerÕs interior. Do not allow alcohol to drip inside the printer. Once the printer is completely dry, re-install the ribbon and close the cover.

C. CLEANING THE DRIVE ROLLER

Periodically, you should clean the printerÕs driver roller (the large black roller in the center of printerÕs interior.) Removing dust and other particles from this roller helps your printer to feed and print more consistently. Refer to the following steps to clean this roller:

1.Leave the power on and open the printerÕs cover by pressing the Cover Release Button.

2.Remove the ribbon.

3.Use a soft, lint-free cloth slightly moistened with isopropyl alcohol to wipe dust or any other particles off the surface of the roller. Use the on off and clear buttons to rotate the roller back and forth while you are wiping the surface clean. Do not allow alcohol to drip into printer!

4.Once the roller is completely dry, re-install the ribbon and close the cover.

D.CLEARING A PAPER JAM

If a sheet of paper becomes jammed inside the printer, refer to the following steps to remove it:

1.Leave the power on and open the printerÕs cover by pressing the Cover Release Button.

2.Remove the ribbon.

3.Press the on off button to advance the paper. Press the clear button to reverse the paper.

4.Turn the printerÕs power off and on to clear its input buffer memory, and restart the print job.

33 Maintaining FotoFUN!