
Section 8: Maintaining FotoFUN!
FotoFUN! is designed to require very little maintenance. Nevertheless, there are a few procedures you can perform on a regular basis or as needed to ensure your printerÕs best performance.
Printhead
Assembly
Printhead
Drive Roller
A. CLEANING THE PRINTHEAD
This procedure is done only if you notice a streak running the length of the print where ink was not transferred. Refer to the following steps to clean the printhead:
1.Disconnect your printerÕs power.
2.Open the printerÕs cover by pressing the Cover Release Button.
3.Use a soft,
4.Once the printhead is completely dry, close the cover. If a streak persists, contact FARGO Technical Support.
Maintaining FotoFUN! 32