
Section 3: Powering Up FotoFUN!
A. APPLYING POWER
The power supply included with FotoFUN! should be properly configured for the power used in your country. Remove the power supply from the box and
CAUTION! If you have any doubts about the plug configuration or the voltage, DO NOT ATTEMPT TO USE THE PRINTER. Contact the printer reseller or FARGO for information on the correct power supply configuration.
1.Plug the power cord into the power cord port of the power supply.
2.Place the DC power plug end of the power supply into the printerÕs Power Input Port.
3.Place the AC power plug end of the power supply cord into an available wall outlet.
Powering Up FotoFUN! 6